Tag Archives: burst pipes

frozen-pipe

Keep Your Pipes from Freezing in Wicked Cold Temps

Last week’s ‘Bomb Cyclone’ was something else. Who calls a storm that? Anyway, a big dump of snow in January has become the norm here in New England, but these subzero temperatures are a bit disturbing. Greg and Brandon from G&C Plumbing and Heating had their hands full after the storm helping customers with frozen pipe issues.

Frozen pipes are a problem because they prevent water flow, but even worse, frozen pipes can eventually burst, causing damage and potential flooding. A lot of people don’t even know they have burst or split pipes until it gets warmer and the ice blockages melt – making a mess. “The biggest problem we typically see is improper insulation,” said Grand Master Plumber Greg who suggests stopping by your local hardware to pick up some rubber foam pipe insulation. “The sleeves are easy to pop on and can save you a ton of headache when temps dip. Additional insulation can also be added to walls and ceilings to keep the pipes warm.”

But, what if you can’t get to the pipes, can’t see them, don’t have that kind of time or money to add insulation this month, or have already done this and are still worried about pipes freezing? No worries. The guys have three plumber-grade tips to help keep your home safe and comfortable during this deep freeze.

  1. Keep interior doors and access panels open. Pipes are often located in cabinets. When the temperatures drop, it is a good idea to keep cabinet doors open so that the heat from the rest of the house can keep the pipes warm as well. You should also keep all interior doors open so that the heat can flow throughout the home. This leads us to…
  2. Keep the heat on. Even if you’re skipping out of town to warmer weather, make sure that the heat is kept on. “The heat does not have to be kept as high as you normally would keep it if you were actually home, but keeping it set above 60 degrees is a good idea especially when it’s really cold out,” said Greg. This should provide enough heat to keep the pipes warm and to prevent any water inside from freezing. And, your grandfather was right –
  3. Allow faucets to drip. Say you have an area of the house where it gets particularly cold, allow the faucets in that area to drip slightly. “Allowing the faucet to be open will relieve pressure in the system. If a pipe freezes, it is actually the pressure that is created between the blockage and the faucet that will cause the pipe to burst,” said Sheck. Allowing the faucet to be open will prevent this pressure from building up and thus, keep the pipe from bursting.

Follow these tips when the temps and wind chill dip to help keep your home safe and comfortable. If you have questions or concerns, don’t hesitate to call the guys at G&C Plumbing and Heating. They can help with any problems you have this season.